Ulano Stencil Remover Powder No 44 is an inexpensive, effective, and relatively trouble-free screen stripping powder. Simply mix 15g per 1 litre of water. 44 will work with all Ulano direct-emulsions, and a wide range of diazo based emulsions in competing brands.

Usage Instructions

1. Using an appropriate solvent such as turpentine or thinners, thorougly clean any remaining plastisol from your screen. Any plastisol left in the screen will likely cause issues in recoating your screen - oil (eg. plastisol) repels water and most emulsions are water-based.
2. Brush the emulsion remover onto both sides of your screen using a gentle scrubbing brush or a standard green scouring pad.
3. Let stand for a couple of minutes to allow the emulsion remover to fully soak into the emulsion. Do not allow the emulsion remover to dry, it will lock the emulsion into the mesh and make it even more difficult to remove.
4. Rinse thoroughly. A standard garden hose nozzle or a pressure washer are both effective for this purpose.

Ulano No. 44 Stencil Remover Powder is a strong oxidant. Contact with combustible or flammable material can cause fire. It can cause skin and eye irritation. Use gloves and goggles. Clean spills immediately.

First Aid: In case of contact with the eyes or skin, flush immediately with water for at least 15 minutes. If irritation develops, contact a physician.