Kiwo Pregasol EP3 Stencil Remover Powder is used for the quick and safe decoating of screen printing screens. It is suitable for all copying materials based on polyvinyl alcohol (not for indirect films) and can be produced as required by dissolving an adequate quantity of powder in water. Pregasol EP3 is odourless, free from chlorine, non-corrosive, and will not damage the screen printing mesh with ongoing use. Pregasol EP3 is a 99.5% pure chemical.

Usage instructions:

1. Dissolve 100g of powder in 5L to 10L of water.
2. Apply solution to both sides of the stencil and allow to soak into the emulsion
3. Rinse off with strong water pressure.